Chepstow to Tintern Wye Valley Greenway

-


Thought I would share some images from our first couple of rides along the Wye Valley Greenway. This is a former railway line that stretches from Chepstow to Tintern. 

This includes the just over a Kilometre long Tidenham Tunnel.
This is home to protected Bats, so there is only low lighting and riders are asked not to use their lights.
It also closes at night, and also is only open from April to September.
There is an alternative route around it. 

There is a Carpark at Wyedean School, Sedbury, Chepstow. With a short ride down a lane, this gives access to 5 miles of traffic free riding. 10 if you go to Tintern and back.










T
The Wireworks Bridge crosses the Wye into Wales at Tintern.









To find out more about the route check out Wye Valley Greenway
 

Comments

Post a Comment

Popular posts from this blog

Brake-up grading on the Ice Trikes

-
Image
  Update:- Since writing this article we have upgraded the brakes due to issues.  Read the follow up blog @   Puttin the Brakes On While the Sturmey Archer drum brakes, that came standard on the Ice Adventure and Adventure HD, are capable of stopping an average person, we are far from average people. So something needed to be changed, to improve the braking performance. You see, Jayne has arthritis in her fingers, a result of her former profession as a climbing, mountaineering and mountain biking instructor and it is getting worse, making her fingers weak and stiff to move. The obvious step is to swap to hydraulics, to improve the brakes, given the mechanical advantage that they offer compared to cable operated drums. But options for this are limited, even with the bizarre and even esoteric systems that Jayne could find on line, some of which included running master cylinders from one company, paired to callipers from another, but with no fluid reservoir! One option which...
Read more

Installing Bafang motors to our Ice Trikes.

-
Image
 First the technical bit - We got the two e motor kits from  Lascycle-EU   via Amazon as after much searching, they seemed like the best source and offered a choice of options. -  https://www.amazon.co.uk/gp/product/B0DY4QZMYH The Motors are at the time of writing this, the latest 48v 250W (British Legal) Can models.  AKA-  MM G340.250.C  mid-drive motors-  https://bafang-e.com/en/oem-area/components/component/motor/mm-g340250c We also paid extra to have the DP C010.CN controllers -   https://www.bafang-e.com/uploaded/manual/BF-UM-C-DP%20C010-EN.pdf Along with 48v 20 amp side mounted batteries, I chose to get an extra battery in order to be able to cover longer distances. We also went for the option of the mounting plates, leading me to also need to buy another mounting plate to carry the second battery. The shopping list also included extending the power leads and speed sensors, as the standard ones are not long enough for either trike ...
Read more

Puttin the brakes on

-
Image
 This is a follow up to the previous post regarding Brake-up grading on the ICE trikes The  Apse Enterprise Ltd,  brakes we had fitted turned out to have issues. While we are extremely grateful to the company for sending us samples, the master cylinder was not up to powering two calipers. This meant constant pumping the brakes, and a incident where I lost brakes completely going down hill. Jayne, my partner and bicycle mechanic, wrote a blog post which I share below, with a few pictures of the new replacements:- "Alas my friends, I write this while baring sad news. I have broken the APSE Artek brakes on my trike. They have always felt quite soft in use, the small piston in the master cylinder struggled to push enough fluid to activate the pistons in the calipers. However, when they bit into the disk, they bit hard and braking was generally excellent, until suddenly, it wasn't. The cause of this sudden change was because I did something a little daft, but great fun. I tri...
Read more